Why Is My iPhone Speaker Not Working During Calls

Is your iPhone's speaker not working during calls? You're not alone! In fact, we've been experiencing this problem ourselves for many months. We tried all the solutions that are available on the internet, and sometimes they helped and other times they didn't, and that's because it's not always because of a hardware failure.

Sometimes the software is behind the issue, and knowing what actually causes the software issue that causes your iPhone speaker not to perform properly during calls, you can prevent the issue altogether.

Part 1. Why iPhone Speakers Are Not Working During Calls

You are most likely to experience this issue if you use a headphone dongle to connect the headphones to your iPhone. This issue is common on most recent iPhones. Likewise, you will face theiPad speaker not workingissue.

Whenever you have finished listening to music or watching a show/movie on your iPhone and you disconnect your headphone dongle. You'll face problems with your iPhone's speaker or microphone during calls.

However, if you don't think that's likely the issue, the reason could be that the speaker got wet because you took it underwater or used it in the rain. Allowing some time for it to dry should fix this.

But if it's not because of any of the aforementioned reasons, in that case, our below solutions should help fix the problem with your iPhone's speaker.

Part 2. The Best All-in-One Solution - EaseUS MobiXpert

If you're struggling with terrible speaker performance during calls with your iPhone,EaseUS MobiXpertis a great tool that will detect the issue and fix it at home at your convenience.

Not only can it fix your iPhone's speaker issues, but it can also fix iTunes backup & restore errors, downgrade to older iOS versions without jailbreaking, and more. For example, EaseUS MobiXpert helps fix theiPhone stuck on verifying updateproblem.

Try this tool immediately and get your iPhone's speaker issue fixed today!

Here are the steps to use EaseUS MobiXpert to fix your iPhone Speaker issue.

Step1.Launch EaseUS MobiXpert on your computer and connect your iPhone to the computer via an original Apple data cable.

Step 2.Click "System Repair" from the home page of EaseUS MobiXpert.

Step 3.Select "Standard Repair" or "Deep Repair" to fix iOS system issues.

Part 3. Additional Ways to Fix the iPhone Speaker Not Working During Calls

You can also try the below-mentioned simple solutions alternatively and see if this fixes the issue.

️1. Restart your iPhone

If the issue was caused by using a headphone dongle, restarting your iPhone should fix it.

Here's how to restart your iPhone if you already didn't know:

Step 1.Press and release the volume-up button.

Step 2.Quickly press and release the volume-down button.

Step 3.Now, press and hold the power button.

Step 4.Slide the "Slide to power off" toggle from left to right.

Step 5.Now your phone will begin to restart.

️2. Disconnect from your wireless connection

If you're connected to a Bluetooth speaker or an earphone, disconnect from them and try using your iPhone.

You could be facing the speaker issue because you are connected to an external speaker system.

Here's how to quickly check if you're connected to a Bluetooth device and disconnect:

Step 1.Tap on the top-right corner of your iPhone and drag your finger down.

Step 2.On the left side, tap on the Bluetooth icon and hold on it.

Step 3.Check if you're connected to any wireless speakers or headphones.

Step 4.Disconnect if you are.

Step 5.Now put your call on speaker and see if it works fine!

️3. Clean your speaker grills

If you don't perform regular dust cleanup on your iPhone, there's a high possibility that your speaker and your microphone will get affected by this.

However, it's not too late, and you can still get this to work properly.

Using an old or new toothbrush, gently rub the speaker grills in a to-and-fro motion for 1-2 minutes, then using a blower, blow on the speaker grill to remove minute dust particles that are still present.

️4. Check your cellular

Sometimes, if your cellular network isn't strong, you could experience issues with your phone calls. That means the problem isn't with your iPhone's speaker.

去细胞信号stro的位置ng and make a phone call. Hopefully, you shouldn't see the problem anymore.

️5. Check the volume

It is possible that you've reduced the volume, and this could be the reason why you're thinking your iPhone's speaker is broken. However, put your call on the speaker and then increase the volume to see if it is working. If you want to know more about how to fixiPhone volume too low, you can read related articles.

️6. Update your iOS software

If you're experiencing this issue after a recent software update, the issue that you're experiencing with your speaker could be because of this update.

However, Apple will immediately release a patch update to fix this problem.

When Apple does so, update your iPhone with the latest available update and check if you're still experiencing the issue. Here is a guide on how to fixnew iPhone stuck on software update. You can click it if you need. Hopefully, you shouldn't.

️7. Contact Apple's customer support

If you tried all of the above solutions and weren't able to fix your iPhone's speaker, in that case, contact Apple's customer support.

They should be able to determine the issue and fix it, and if your iPhone is under warranty, you could also get a replacement free of charge.

The Bottom Line

We hope our above solutions helped you fix the speaker issue you've been having, and now it's running without any issues.

However, if it didn't help, try the EaseUS MobiXpert. But if you think the speaker is permanently damaged because of a hardware defect, in that case, you need to take it to the Apple store and get it checked. If your phone is under warranty, you could also get a replacement.

FAQs on Why Is My iPhone Speaker Not Working During Calls

Do you have any other questions about your iPhone's speaker? Here, we answer everything about it.

1. How do I test my iPhone speakers?

It's very simple to test your iPhone speakers. Simply play any type of media, increase the volume, and see if it plays properly without distortion or crackling.

2. How do I get both speakers to work on my iPhone?

If one of the speakers on your iPhone works and the other doesn't, try the EaseUS MobiXpert or contact Apple's customer support.

3. Do iPhone speakers get clogged?

Yes, iPhone speakers get clogged if you submerge them in water.