iPhone Black Screen Spinning Wheel | Click for 4 Fixes

Many iPhone users face the issue of getting their device stuck on the black screen and a spinning wheel, which implies that the iPhone is working on itself. It can happen for multiple reasons that must be acknowledged beforehand. However, read this guide to find some simple and quick fixes!

sofia albert
年代ofia Albertupdated on Jun 12, 2023 |Home>iOS & Mac Topics

iPhone users often experience the problem of a black screen with a spinning wheel. Generally, your device gets stuck in the reboot phase while updating iOS or performing a factory restore. This failed attempt can be a rebooting mistake, a simple systematic error, or a hardware problem.

年代o it is food for thought that why your iPhone gets stuck on a black screen and a spinning wheel and what steps need to be taken in this situation. So this comprehensive guide covers its reasons, along with the leading solutions to get out of this problem!

4 Fixes on iPhone Black Screen Spinning Wheel

No doubt, the serious hardware issues require professional aid from the Apple store. But the spinning wheel on the iPhone's black screen is a software problem that could be fixed yourself. You can quickly make your iPhone boot and function properly as before by trying some simple methods available in this article. Le's begin!

年代olution 1. Recharge your iPhone

Charging holds crucial importance for any digital device, especially while rebooting. So, get your iPhone charged immediately. It's because the device will require more charging if the restoration or iOS update takes a longer time than usual. Otherwise, iPhone won't be able to boot normally because of the low battery.

Hence, recharge your iPhone first and restart it later!

年代olution 2. Force Restarting the iPhone

In case the booting process fails due to an error, you can start it again easily. Since the force restarting doesn't result in data loss, it is good to perform. Below are the steps based on your iPhone model.

For an iPhone 8 and Later:

  • Press & release the Volume Up button quickly. Now, press the Volume down button instantly.
  • Next, press & hold the Side/Power button until your screen displays the Apple logo. Release the buttons and wait for a moment; the iPhone will restart.

For an iPhone 7 and 7 Plus:

  • Press & hold the Sleep/Wake button and Volume down button simultaneously until the Apple logo appears. Let go of the buttons to restart.

For an iPhone 6 and Earlier:

  • Keep holding the Home and Sleep/Wake buttons at once but release both when the Apple logo appears on the screen.

年代olution 3. Restore iPhone via iTunes/Finder

The force restart may not be able to solve serious configuration issues. If the issue persists, you need to restore/update the iPhone using iTunes or Finder through recovery mode. It will probably help you fix the iPhone problem of a black screen with a spinning wheel. However, you must ensure a backup to protect yourself from data loss.

Let's follow the detailed steps to restore iPhone:

年代tep 1.Firstly, you need to plug the stuck iPhone into a computer system through a Lightning or a USB cable.

年代tep 2.Now, take the necessary steps to let your iPhone enter into recovery mode.

Depending on the model, these steps are the same as for your iPhone force restart. However, keep holding the buttons even after the Apple logo appears. Let go of the buttons only when you see the recovery mode screen on your iPhone.

年代tep 3.

  • In the case of iTunes, press the "Device" tab from the top-left of its window, and click "Summary."
  • But for Finder, tap the iPhone from the left-hand column and go under the "General" section.

年代tep 3.The next step in both cases involves pressing the "Restore iPhone" button, clicking "Restore," and following the given instructions. You are all done!

restore iphone

年代olution 4. Perform an iPhone Factory Reset

When the above solutions don't work, a factory reset may get you out of this trouble of a black screen with a spinning wheel. The reason is its capability to get your device back into the default state by resetting all the iPhone settings. There are multiple ways onhow to factory reset an iPhone without a computeror with one.

What Causes iPhone Black Screen Spinning Wheel

When your iPhone displays a black screen with a spinning wheel, it means your iOS is recovering itself. Many factors contribute to this issue; however, software glitches take the lead.

First of all, the unique features of the iOS upgrade might not be compatible with your iPhone model, so it requires some configuration changes. However, it can also be due to improper iPhone boot or bad app installation.

Other reasons include the failed attempt of your device to recover itself from a crash or post-crash problem that could not be fixed.

另外,它也可能是当damag硬件问题ed or corrupted part of your iPhone shows a black screen with a loading sign. Last but not least, a low battery is a rare cause that leaves your phone disabled.

Conclusion

Getting your iPhone stuck on the black screen with a spinning wheel is really annoying, but no worries because you can fix the problem by force restarting your device. But if not, you can also apply other recommended solutions, one by one, from this write-up to overcome this scenario.

FAQs on iPhone Black Screen Spinning Wheel

If you need quick answers to your queries, here are some commonly asked questions to look at!

1. Why is my iPhone stuck on the Apple logo?

Though there are multiple reasons why your iPhone gets stuck on the Apple logo, software issues are the most common ones. You may have tried restoring the backup on your iPhone or migrated from another device to your iPhone. In addition, the iOS or any app installation may result in this trouble. Lastly, it will surely be a hardware problem.

2. How do I fix my iPhone with a black screen and spinning wheel?

The quick method to fix your iPhone with a black screen and spinning wheel is to force restart it. It helps you fix malware and bug problems. But if it fails, you must try other solutions, such as charging your iPhone, hard reset using iTunes/Finder, iPhone unlocker software, and more.

3. Why is my iPhone keeps loading?

Mainly, there is a software problem if your iPhone keeps loading with a spinning wheel. It means that iOS is trying to recover itself. It can be a failed reboot, an iOS update, an iOS beta installation, or low charging. And if not, it may be a hardware issue due to a damaged part in your iPhone.