Boot From USB HP Laptop | Everything You Need to Know

Earlier, people loaded the OS onto CDs/DVDs and booted it up on the new computers. With the USBs making booting up the Windows OS more accessible, the traditional methods are put to rest. Now, you can simply use the USB to boot up your HP laptop. Let us read this passage fromEaseUSto learn how to boot from a USB HP laptop and get the new OS running instantly.

What Does HP Laptop Boot From USB Mean

With time, older laptops lose their performance due to various factors and want to upgrade to a new OS.

A new OS improves the overall computer experience with efficient programs and algorithms. The HP laptop boot USB uses a bootable USB, which is a USB file with the new OS software for installation on your HP laptop.

Why Do We Need to Boot HP Laptop With USB

As we bid adieu to the olden days of using discs/CDs/DVDs to boot computers with new software, the convenience of using a USB makes the whole process a lot easier. And some users prefer to carry a portable USB for easy Windows access rather than the whole laptop. All you gotta do is make anISO fileof your OS and load it on USB. Then you can either use them as portable USBs or bootable USB drives.

How to Boot From HP Laptop USB on Windows 10/11

You can invoke BIOS setup in 2 ways, then follow the steps using system configuration to boot from a USB HP laptop. Let us get into the detailed steps for both methods.

1. 1. From Settings
2. 2. Using System Configuration

1. From Settings

Back in the day, the traditional method was to use the hotkeys to invoke theBIOSsetup to boot up the computers with USB drives. But with time, there is little to no time for normal users to invoke the BIOS settings. So, you can also boot the laptop with the new software on USB from the settings. Follow the steps below for a guide.

Step 1.Use the search or pressWindows + Ito access theWindowsSettings．

Step 2.Go toUpdate & Securitytab, and within the window, scroll down and find the Update & Security.

Step 3.SelectRecovery > Restart Now．

The Restart Now button allows you to reboot the PC for configuration or restoration. Once the PC reboots, a special menu appears with options like "Use a device," "Continue," "Turn off your PC," or "Troubleshoot．"

Step 4.SelectTroubleshoot > Advanced options > UEFI Firmware settings．

This action invokes theBIOS settingson your Windows computer.

Step 5.Confirm the restart.

2. Using System Configuration

To boot up the HP laptop with a USB drive, we need to tweak some changes in the system configuration in the BIOS settings to make the USB device first. The computer will boot up from the USB rather than the system's OS. After invoking the BIOS setup using settings or BIOS keys, follow the steps below.

Step 1.Turn on your PC, and immediately press theESCkey (Escape) multiple times to invoke the startup menu.

Step 2.In the Startup menu, Click onF10to open theBIOS setup utility．

Step 3.Use the arrow keys to navigate between the options, and go toSystem Configuration > Boot options.

Step 4.Now, set theUSB bootto Enabled using the arrow keys and enter buttons.

Remember: The BIOS settings on many computers have USB boot options as USB or Removable devices. In some computers, you may find it as a Hard Drive choice, so look around a little bit based on your computer and enable it.

Step 5.Now, we need to move theUSB Hard Diskto be first in the boot order. Use the F5 and F6 buttons, and move them to the top underUEFI Boot Order．

Step 6.SelectLegacy Supportand disable it.

Step 7.Navigate to theExit section > Exit Saving Changes > Press Enterto select Yes.

Step 8.Connect the USB to the USB port, and immediately press the ESC (Escape Key) once every second to open the Startup menu again.

第9步。SelectF9 (Device Boot Options) > USB Flash Drive > Enter．Now, follow the on-screen instructions to boot from a USB HP laptop.

HP Laptop Not Booting From USB on Windows 10/11

In most situations, the boot from USB HP laptop process gets done if you are bound to the prerequisites. But, sometimes, the HP laptop not booting issue might pop up. Or theUSB was not showing in the boot menu．这可能是由于各种问题,如磁盘有限公司nnections, improper boot order, driver issues, and outdated BIOS settings. Let us see the solutions to fix it.

1. 1. Reconnect USB
2. 2. Change USB Configuration
3. 3. Configure the Boot Order
4. 4. Reset the Boot Order

1. Reconnect USB

Remove the USB connection to the system and reconnect it. Sometimes a fresh connection works, and booting from USB HP with the new software again.

2. Change USB Configuration

The newer generations of computers are coming with USB 3.0 as well as USB 2.0 ports, which may result in driver issues. Since most BIOS systems support USB 2.0, you can only load the Operating system with USB 3.0 drivers. You can configure the USB 3.0 to auto to solve this issue. To do this, follow the steps below.

Step 1.Invoke theSystem Utilityoptions. Now navigate toConfiguration > BIOS/Platform Configuration (RBSU) > System Options > USB Options > USB 3.0 Mode > Enter.

Step 2.Select theAutooption as USB 3.0 and press Enter. This will make the PC operate at USB 2.0 speed during the pre-boot environment and lets you boot the HP laptop with the USB smoothly while booting.

Step 3.PressF10to save changes, and restart the USB drive to boot the PC with new software.

3. Configure the Boot Order

The BIOS settings may get a little tricky if you are on a Windows 10 computer. The Fast Boot and Secure Boot options may halt the process, so disable them. The steps are given below.

Step 1.Turn on or restart your laptop and immediately press the HP boot menu keyESCto access the startup menu.

Step 2.PressF10for the BIOS setup from the four options．

Step 3.Now navigate toAdvanced > Boot Options．Then disable or uncheck theFast BootandSecure Bootfrom the options.

Step 4.Scroll down toBoot mode, and check theLegacyoptions. Then use the F5 and F6 keys to make the "USB hard drive" the first boot option in UEFI Boot Order.

Step 5.Click thesavebutton, ClickYesto confirm the changes, and restart the computer.

Step 6.Shut down the computer completely once. Hold the power button for a while to do it. After some time, try to boot the HP laptop with USB again.

4. Reset the Boot Order

Rather than changing the boot order, you can reset the whole boot order to default to see if the boot from the USB HP laptop works. The steps to reset the boot order to default are given below.

Step 1.Turn on or restart your laptop and immediately press the HP boot menu keyESCto access the startup menu.

Step 2.PressF10for the BIOS setup from the four options.

Step 3.Navigate toFile > Apply defaults and Exit.This action will restore the computer BIOS to defaults and exits the Stepup window automatically.

The last thing you can try is to update the firmware drivers to Update the BIOS settings on the computer if you are facing an HP laptop not booting from USB on Windows 10/11.

Pro Tip: How to Backup HP Laptop for Data Security

Well, the boot processes are quite uncertain sometimes, even for the best of the users to execute everything seamlessly. So, it is only viable to make a backup of your data or the previous one for Data Security. The best tool to back up your important data and safeguard data on any laptop is theEaseUS Todo Backup, a perfectbackup software．

In fact,EaseUS Todo Backup Homeis a professional tool for quick and secure data backup. It offers system backup, disk/partition backup, files, and other services with advanced backup programs. The simple backup management with enhanced efficiency allows you toschedule backups定期自动。随着se, the benefits also include cloning with a bootable disk.

There are somekey features of EaseUS Todo Backup:

• Award-winningautomatic backupsolutions for all situations.
• Reliable cloning software for upgrades, backups, and disk duplications.
• Efficient and secure backup for disks, systems, and files.
• The basic plan Offers multi-path andcloud storageof up to 250GB.

In a word, this third-party software has powerful functions. It can help users back up disks, partitions, or files andback up SD cardsor other external drives. Therefore, it is strongly recommended that you can choose this software as your backup tool to back up your HP laptop for your data security.

Conclusion

Toboot from USB HP laptop, you only need to open the BIOS settings and change the preferences for USB drive boot up. Make changes in the boot options, load the software into the USB drive, and use it to boot from a USB HP laptop. Therefore, it is suggested that you can chooseEaseUS Todo BackupHometo help you fix your problem.

If you want to learn more information about the boot, here are two articles you may be interested in:

FAQs About Boot From USB HP Laptop

Here are some related questions on the boot from a USB HP laptop. If you have similar queries hope this will help you.

1. What Key Do I Press to Boot From USB on HP?

You can do the boot from USB on HP using two keys, indicating two ways to access the boot options to make the USB boot.

• The ESC or F9 keys (the HP boot menu key) immediately after the restart.
• The F10 key ( the BIOS key) is repeated after the restart until the BIOS setup appears.

2. How Do I Get to My HP Laptop's Boot Device Selection Menu?

Firstly, you must invoke the BIOS setup using the HP boot menu (ESC) or BIOS key (F10). Now, navigate to System Configuration and Boot Options to change the boot device selection.

3. How Do I Enable USB Boot on UEFI?

Step 1.Make sure your device is turned off.

Step 2.You need to plug the bootable USB drive you created into the computer you want to boot.

Step 3.Using the UEFI menu, turn on your computer and boot from the USB drive. The device should boot into Factory OS.